Select Your Frame

Popular Brands

Can’t Find Your Frames?

If you know the model information, enter it here. Otherwise, you can briefly describe your glasses

⚡ Sign Up to Get $5 OFF your First Order

 FREE US Shipping for Orders $65+

60-Day Guarantee Learn More 

What is AMP ? Learn More
Lens Installation Guides

How to Install Your Fuse Lenses

Replacing your lenses is quick and straightforward. Browse our installation videos by frame model or follow the step-by-step instructions below for your frame style.

Specific Frame Installs

Installation Videos by Frame Model

Oakley Holbrook

Full Frame Lens Replacement

Full-frame sunglasses are the most common style for replacement lenses. Most installations can be completed by hand without special tools.

  1. 01
    Grip the frame securelyHold the frame firmly at the top and bottom so pressure is spread evenly.
  2. 02
    Flex and removeGently flex the top edge while pushing the old lens outward from behind.
  3. 03
    Seat the new lensStart at the nose bridge, then press around the outer edge until the lens locks in place.

Half-Frame Sunglasses

Half-frame designs use retention tabs and channels to secure the lens. Follow the installation sequence carefully to ensure a proper fit.

  1. 01
    Stabilize at the bridgeHold the frame at the nose bridge with one hand and support the lens with the other.
  2. 02
    Release the tabRemove the old lens by pulling the tab free from the nose socket.
  3. 03
    Insert the replacementPlace the new lens tab into the temple socket first, then align the inner tab.
  4. 04
    Snap into placePress the inner tab into the nose socket until the lens is fully secured.

Wire Frame Sunglasses

Wire-frame sunglasses typically require a small screwdriver to loosen the lens channel before removing and installing lenses.

  1. 01
    Loosen the hardwareUse a small screwdriver to loosen the screw near the lens edge by the temple.
  2. 02
    Remove the old lensOnce the channel opens, carefully lift the lens free from the frame groove.
  3. 03
    Fit the new lensSet the replacement lens into the groove and align all edges before tightening.
  4. 04
    Secure the frameTighten the screw until the lens is snug and stable without over-torquing it.

Shield Frame Sunglasses

Shield-style frames use a single-piece lens design. Take your time during installation to ensure the lens seats properly and locks securely into place.

  1. 01
    Release the nosepadPinch and push the nosepad backward to open the locking point.
  2. 02
    Flex from the cornerStart at one outer corner and gently flex the frame to free the old shield lens.
  3. 03
    Press the new shield inInsert the replacement from the top edge first and work it into the groove.
  4. 04
    Lock the fitPull the nosepad forward again to secure everything in place.

Need Help with Installation?

Need assistance with your installation? Our support team is available to help with frame identification, installation questions, and replacement lens recommendations.

Shop Custom Lenses